| Specifications |
| Software |
| Built-In Web Server | Yes |
| Web HMI | Yes |
| I/O Pair Connection | Yes |
| Communication |
| Ethernet Port | 1 x RJ-45, 10/100 Base-TX |
| PoE | yes |
| Protocol | Modbus/TCP, Modbus/UDP |
| Security | ID, Password and IP Filter |
| Dual Watchdog | Yes, Module (0.8 second), Communication (Programmable) |
| LED Indicators |
| L1 (System Running) | Yes |
| L2 (Ethernet Link/Act) | Yes |
| L3 (Ethernet 10/100 M Speed) | - |
| PoE Power | yes |
| 2 Way Isolaiton |
| Ethernet | - |
| I/O | 2500 Vrms |
| EMS Protection |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal and ±8 kV Air for Random Point |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| Surge (IEC 61000-4-5) | ±0.5 kV for Power Line |
| Power Requirements |
| Reverse Polarity Protection | Yes |
| Powered from terminal block | Yes, 12 ~ 48 VDC |
| Powered from PoE | Yes, IEEE 802.3af, Class1 |
| Consumption | 3.9 W (max.) |
| Mechanical |
| Dimensions (W x L x D) | 123 mm x 72 mm x 35 mm |
| Installation | DIN-Rail or Wall mounting |
| Environment |
| Operating Temperature | -25 °C ~ +75 °C |
| Storage Temperature | -30 °C ~ +80 °C |
| Humidity | 12 - 48VDC |
| Analog Input |
| Channels | 6 (Differential) |
| Sensor Type | +/-500 mV, +/-1 V, +/-5 V, +/-10 V +0 mA ~ +20 mA, +/-20 mA, 4 ~ 20 mA (Jumper Selectable) |
| Individual Channel Configuration | Yes |
| Resolution | 16-bit |
| Sampling Rate | Normal Mode | 10 Samples/Second (Total) |
| Fast Mode | 50 Samples/Second (Total) |
| Accuracy | Normal Mode | +/-0.1% |
| Fast Mode | +/-0.5% or better |
| Zero Drift | +/-20 µV/°C |
| Span Drift | +/-25 ppm/°C |
| Over Voltage Protection | 240 Vrms |
| Overcurrent Protection | 50 mA Max. at 110 VDC/VAC Max |
| Common Voltage Protection | ±200 VDC |
| Overcurent Protection | Yes, 50 mA at 110 VDC |
| Virtual Channel to Channel Isolation | Yes |
| Input Impedence | Voltage: 2 MO
Current: 125 O |
| Common Mode Rejection | 86 dB Min. |
| Normal Mode Rejection | 100 dB |
| Analog Output |
| Channels | 2 |
| Type | +0 VDC ~ +5 VDC, +/-5 VDC, +0 VDC ~ +10 VDC, +/-10 VDC,+0 mA ~ +20 mA, +4 mA ~ +20 mA (Jumper Selectable) |
| Individual Chanel Configuration | Yes |
| Resolution | 12-bit |
| Accuracy | +/-0.1% of FSR |
| Voltage Output Capability | 20 mA @ 10 V |
| Current Load Resistance | 500 O |
| Open Wire Detection | Yes, for 4 ~ 20 mA only |
| Power-on Value | Yes, Programmable |
| Safe Value | Yes, Programmable |
| Digital Input/Counter |
| Channels | 2 |
| Dry Contact (Source) | On Voltage Level | Close to GND |
| Off Voltage Level | Open |
| Effective Distance for Dry Contact | 500 M Max. |
| Wet Conact (Sink Source) | On Voltage Level | +1 VDC Max |
| Off Voltage Level | +3.5 VDC ~ +30 VDC |
| Counters | Channels | 2 |
| Max. Count | 4,294,967,295 (32-bit) |
| Max. Input Frequency | 100 Hz |
| Min. Pulse Width | 5 ms |
| Overvoltage Protection | 30 VDC |
| Digital Output |
| Channels | 2 |
| Type | Isolated Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Max. Load Current | 700 mA/Channel |
| Load Voltage | +5 VDC ~ +50 VDC |
| Overvoltage Protection | 60 VDC |
| Overload Protection | 1.4 A |
| Short-circuit Protection | Yes |
| Power-on value | Yes, Programmable |
| Safe Value | Yes, Programmable |
