| Specifications |
| Communication |
| Interface |
RS-485 |
| Format |
(N, 8, 1) |
| Baud Rate |
1200 ~ 115200 bps |
| Protocol |
DCON |
| Dual Watchdog |
Yes, Module (1.6 Seconds), Communication (Programmable) |
| LED Indicators/Display |
| System LED Indicator |
Yes, 1 LED as Power/Communication Indicator |
| I/O LED Indicators |
16 as High/Low Alarm Signals |
| Isolation |
| Intra-Module Isolation, Field-toLogic |
3000 VDC |
| EMS Protection |
| ESD (IEC 61000-4-2) |
±4 kV Contact for each Terminal |
| ESD (IEC 61000-4-3) |
3 V/m, 80 MHz ~ 1 GHz |
| Power |
| Power Consumption |
Typical |
1.3 W |
| Maximum |
3.1 W (4-channel Output 20 mA at 10 V) |
| Mechanical |
| Dimensions ( L x W x H) |
115 mm × 30 mm × 85 mm |
| Environment |
| Operating Temperature |
-25°C ~ +75°C |
| Storage Temperature |
-40°C ~ +85°C |
| Relative Humidity |
10 ~ 95% RH, non-condensing |
| I/O Specification |
| Digital Input |
| Channels |
4 |
| Current Output Wiring |
Sink |
| Range |
0 ~ +5 VDC, ±5 VDC, 0 ~ +10 VDC, ±10 VDC, 0 ~ +20 mA, +4 ~ +20 mA |
| Resolution |
14-bit |
| Accuracy |
±0.1% of FSR |
| Zero Drift |
Voltage |
±30 µV/°C |
| Current |
±0.2 µA/°C |
| Span Drift |
±20 ppm/°C |
| DA Output Response Time |
10 ms per channel |
| ESD Protection |
4 kV (Contact for each channel) |
| Programmable Output Slope |
0.125 ~ 2048 mA/Second |
| 0.0625 ~ 1024 V/Second |
| Output Capacity |
Voltage |
10 VDC @ 20 mA
|
| Current |
External +24 VDC @ 1050 O |
| Open Wire Detection |
Yes |
| Short Circuit Protection |
Yes |
| Power-on Value |
Yes |
| Safe Value |
Yes |
| Open Daughter Board Detection |
Yes |
