PR55-17B

The NCD Ethernet Modem connects to your local area network and receives sensor data from NCD sensors supporting a single client connection. Simply open up the IP Address, Port 2101, of the Ethernet Modem and start receiving data from NCD long-range wireless sensors. Use Alpha Station for testing on a Windows 10 computer. The NCD network settings also support a Static IP Address and an integrated web page for Ethernet configuration, as well as a desktop application for recovery. Install multiple modems onto a single network to cover longer distances or multiple floors of a building. All NCD Modems also act as repeaters for NCD Long Range Wireless Sensors to extend range. No additional settings are required as this is a passive feature of the device once powered up.

Connect to the NCD wireless sensor ecosystem using a sensibly simple Ethernet interface. Our new IoT Wireless Ethernet Modem makes it easy to communicate with NCD wireless sensors over Ethernet by simply opening a TCP/IP port and watching for incoming data to arrive as sensor data is broadcast. We have stripped away complexity and focused on what you need most—an easy way to get wireless data over an Ethernet connection. With a 2-Mile range (line of sight), this device operates at 900MHz for deep penetration through trees, foliage, and even some buildings. With integrated Mesh networking, this device also acts as a repeater for sensor data. Designed to work with any operating system that supports TCP/IP communications. Simply open port 2101 and watch for data to arrive from NCD wireless sensors.

This Ethernet Gateway was designed for indoor use only. Requires a 12VDC Power Supply.

• Industrial Grade IoT Wireless to Ethernet Modem
• Receive Wireless Sensor Data from NCD Sensors
• Converts Wireless Data to TCP/IP Over Ethernet
• Operating Temperature Range: -40 to +85 °C
• Input Voltage Range: 5V-32V DC
• Works with PC, MAC, Linux, and Edge Gateway
• 2 Mile Range with On-Board Antenna
• Wireless Mesh Networking using DigiMesh®