| Specifications |
| CPU |
| CPU | 80186 CPU (80MHz) |
| SRAM | 512K Bytes |
| Flash Memory | 512K Bytes |
| EEPROM | 16K Bytes |
| Dual Watchdog | Yes |
| Communication |
| Ethernet Port | 10/100 Base-TX (With Link, Activity LED Indicator) Automatic MDI/MDI-X |
Analog Input | | Input Channels | 10 Differential |
Input Type | ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V ±20 mA, 0~20 mA, 4~20 mA (Requires Optional External 125 Ohms Resistor) Thermocouple (J, K, T, E, R, S, B, N, C, L, M, LDIN43710) | | Resolution | 16-bit |
| Sampling Rate | 10 samples/Sec. total |
| Accuracy | ±0.1% or better |
| BandWidth | 15.7 Hz |
| Zero drift | ±0.5 µV/°C |
| Span drift | ±25 ppm/°C |
| Input Impedance | >300K Ohmsr |
| Common Mode Rejection | 150 dB min. |
| Normal Mode Rejection | ±100 dB |
| Open Thermocouple Detection | Yes |
| Individual Channel Configuration | Yes |
| Over Voltage Protection | 240 Vrms |
| ESD Protection | 4kV Contact for each terminal, and 8KV Air for random point |
| EFT Protection | 4kV for Power |
| Digital Output |
| Output Channels | 6 (Sink) |
| Output Type | Isolated Open-Collector |
| Max Load Current | 700mA/Channel |
| Load Voltage | 5 ~ 50 VDC |
| 2 Way Isolation |
| Ethernet | 1500 VDC |
| AI and DO | 2500 VDC |
| LED Indicator |
| PoE | PoE On |
| L1 | Run |
| L2 | Link/Act |
| L3 | 10/100 M |
| Mounting |
| Din Rail Mount | Yes |
| Wall Mount | Yes |
| LED Indicator |
| PoE | PoE On |
| L1 | Run |
| L2 | Link/Act |
| L3 | 10/100 M |
| Power Requirements |
| IEEE 802.3af | Class 1 |
| Required Supply Voltage | Powered by Power-Over-Ethernet (PoE) or auxiliary power +12 ~ 48 VDC(non-regulated) |
| LED Indicator | Yes |
| Power Consumption | 0.12 A @ 24 VDC Max. |
| Environment |
| Operating Temperature | -25°C ~ +75°C (-13°F ~ +167°F) |
| Storage Temperature | -30 ~ +80°C |
| Wire Strip Length | 4~5 mm |
| Relative Humidity | 5 ~ 90% RH, non-condensing |
| Dimensions |
| Dimensions( W x H x D) | 123 mm x 72 mm x 35 mm |
