Gateway to connect Modbus RTU Slave(s) and a BACnet/IP Client. Mounting: Din Rail, with Power Supply. Platform N34: 1x 5Pin Screw Terminal (RS232/485/422), 1x DB9 Port (RS232/485/422), 1x Ethernet RJ45. Barrel plug for power supply. The 460MMBS moves data between up to 32 Modbus RTU Slaves and a BACnet/IP Building Automation System (BAS). It’s the perfect tool that allows you to use the plethora of Modbus RTU devices available in your BACnet/IP Building Automation Systems.
For most applications the mapping is very straight forward. Modbus RTU register data is mapped to BACnet/IP analog objects and Modbus RTU coil data is mapped to binary objects in BACnet/IP. The only additional piece required for BACnet is adding meta data which is nothing more than an ASCII description of each object. No other deep understanding of either protocol is required to configure the gateway.
Features:
- Gateway Security:
You can configure up to 9 different users access to diagnostic and configuration screens. Alarming: Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent. - Translation Table:
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway. - Status and Counters:
Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device. - Diagnostic Logging Page:
Allows users to see and log start up sequences, protocol specific messages & error messages.
