| Specifications |
| EtherNet/IP Adapter FEATURES |
| Operation Mode | Class 1 I/O Adapter |
| Message Support | Implicit Class 1 Cyclic I/O, Explicit Class 3 and UCMM Supported |
| Data Types | BIT8,16 & 32; INT8, 16, 32 & 64; UINT8,16, 32 & 64; Float & Double |
| Maximum EtherNet/IP Scanner Devices | Up to 10 can listen, only 1 can write I/O |
| Maximum Data Supported | Up to 480 bytes in each direction |
| Maximum IO Scan Rate | 20 msec |
| Modbus RTU Master FEATURES |
| Operation Mode Modbus | RTU Master |
| Function Codes Supported | 1,2,3,4,5,6,15 & 16 |
| Swapping | Byte and Word Swapping |
| Maximum Modbus RTU Slave Devices | 32 |
| Number Read/Write Scan Lines per RTU Slave Device | 200 Total - 100 reads & 100 writes |
| Scan Line Support | Up to 125 Registers or 512 Coils |
| ELECTRICAL / ENVIRONMENTAL |
| DC Input Voltage | 8 VDC @ 230mA to 28 VDC @ 80 mA |
| Maximum Baud Rate | 115K baud |
| Operating Temperature | -40 C to 85 C |
| Certification | RoHS-Compliant, UL, CUL, CE Approvals, Class I
Div 2 |
| ENCLOSURE / HARDWARE |
| Size | 4.2? x 3.25? x 1? |
| Weight | 7 oz |
| Enclosure Type | Anodized Aluminum |
| Mounting | Din rail or panel mount |
| LEDs | Ethernet link/data LED, Ethernet speed LED, power
LED, & 2 general purpose LEDs on side |
| GATEWAY FEATURES & FUNCTIONS |
| Alarming | Set <, <=, >, >=, ==, !=, and change-of-state rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent. |
| Gateway Security | You can configure up to 9 different users access to diagnostic and configuration screens. |
| Translation Table | Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway. |
| Status and Counters | Protocol specific status, counters, and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device. |
| Diagnostic Logging Page | Allows users to see and log start up sequences, protocol specific messages & error messages. |
