| Technical data |
| General |
| Standard | EN61010-1
EN61010-2-201
EN61131-2 |
| Dimensions (W × H × D) | 72x90x62mm |
| Weight | 240g |
| Mounting | Top hat rail EN50022,35mm |
| Environmental conditions, Indoor use only |
| Operating ambient temperature | 0°C –55°C |
| Relative humidity–non-condensing | 80% for temp. up to 31°C,decreasing linearly to 50% relative humidity at 55°C |
| Pollution Degree | PD2 |
| Altitude | up to 2000m AMSL |
Vibration (5 = f = 9 Hz)
Vibration (9 = f = 150 Hz) | 1,75mm amplitude sinus
3,5mm amplitude random
0,5g acceleration sinus
1,0g acceleration random |
| Transport and Storage. | -20°C –+70°C
10 to 90% no condensation
Altitude3000m AMSL |
| Shock response | 15g, 11ms half sinus all 3axes |
| I/O |
| Supply voltage | 24V |
| USB (Power for programming only) | USB-B, 2.0 |
| Ethernet | RJ45, 10/100Mbps |
| Analog inputs | 2x 0-10V |
| Analog outputs | 2x 0-10Vor0-20mA |
Inputs, no galvanic insulation
Common analog/digital
Digital
Fixed digital, ext. Interrupt usable | 18
12
4
2 |
Digital Outputs, no galvanic insulation
Relay outputs | 8
10 |
PIN Header, no Galvanic insulation
Logic level Input
Logic level Output
Communication
Internal Power |
12 parallel to terminal Inputs
12 parallel to terminal Outputs
SPI, 2xUART, I2C, Reset
+3,3V, +5V, ARef, GND |
| Terminal capacities |
Relay Output, Power Input
Strip length
Max. tightening torque | 2,5mm² (24-12AWG)
6-7mm
0,5Nm |
Digital, Analog Input Output
Strip length
Max. tightening torque | 1,5mm² (30-16AWG)
5-6mm
0,2Nm |
| Pin header connector | 2x 26 Pin, Dual row, 2.54 pitch |
| Protection |
| ESD HBM Class 0 | Contact discharge: ±4kV
Air discharge: ±8kV |
| Supply input over current protection | Internal Fuse 20A (fast) |
| Relay Output | External Fuse required |
| Digital Output | Overload, short circuit, ESD |
| Signal Input | Overvoltage, ESD |
Pin header connector
Current +5V, +3,3V | ESD
total 200mA, resettable fuse |
