| Specifications |
Analog Output |
| Channels | 1 |
| Type | 0 ~ 10 V, 0 ~ 20 mA, 4 ~ 20 mA |
| Resolution | 12-bit |
| Accuracy | +/-0.1% of FSR |
| DA Output Response Time | 10 ms |
| Voltage Output Capability | 20 mA |
| Current Load Resistance | 500 O |
Digital Input/Counter |
| Channel | 1 |
| Type | Dry |
| On Voltage Level | Close to GND |
| Off Voltage Level | Open |
| Counters | Channels | 1 |
| Max. Count | 65535 (16-bit) |
| Max. Input Frequency | 100 Hz |
| Min. Pulse Width | 5 ms |
Relay Output |
| Channels | 1 |
| Type | Power Relay, Form C |
| Operating Load Voltage Range | 250 VAC or 30 VDC |
| Max. Load Current | NO : 10 A @ 250 VAC |
NC : 6 A @ 250 VAC | | Operating Time | 15 ms max. |
| Release Time | 5 ms max, |
| Mechanical Endurance | 1 X 107 OPS |
| Electrical Endurance | 5 X 104 OPS |
| Power On and Safe Value | Yes, Programmable |
Communication |
| Interface | RS-485 |
| Format | (N, 8, 1), (N, 8, 2), (O, 8, 1), (E, 8, 1) |
| Baud Rate | 1200 ~ 115200 bps |
| Protocol | DCON, Modbus/RTU, Modbus/ASCII |
| Dual Watchdog | Communication (Programmable) |
LED Indicators |
| Power | 1 LED as Power Indicator |
Isolation |
| Intra-module Isolation, Field-to-Logic | 2500 VDC |
EMS Protection |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal
±8 kV Air for Random Point |
| EFT (IEC 61000-4-4) | ±4 kV for Power |
Power Requirements |
| Reverse Polarity Protection | Yes |
| Powered from Terminal Block | Yes, 10 ~ 30 VDC |
| Consumption | 1.8 W Max. |
Mechanical |
| Dimensions (W x L x H) | 52 mm x 98 mm x 27 mm |
| Installation | DIN-Rail Mounting |
Environment |
| Operating Temperature | -25 °C ~ +75 °C |
| Storage Temperature | -30 °C ~ +80 °C |
| Humidity | 10 ~ 95% RH, Non-condensing |
