Voltage
  Choose store
Home/Sensors & Transducers/Signal Conditioning/Analog/Voltage

Voltage

Products (Total Items: 22 )
Sort by:
More results 1 2 Next page View All
K109S
K109S
K109S is a device that accepts mA/V signals able to convert it into mA/V standard signals. The device can power also all 2-wire sensors
Average Rating(0)
$159.30
In stock.
K120RTD
K120RTD
Pt100 and Ni100 to 4..20mA (loop powered) converter - non isolated, standard
Average Rating(0)
$86.14
In stock.
S315
S315
4 digit loop powered display with 4-20 mA input signal. Programmable by front keys and menu, protection by password. Dimension: 96 x 48 x 40 mm
Average Rating(0)
$96.76
In stock.
Z109S
Z109S
Z109S is a device that allows to isolate a mA signals. The device can power also all 2-wire sensors
Average Rating(0)
$96.76
In stock.
K109PT
K109PT
K109PT is a converter for Thermoresistance PT100 with 2,3,4 wires and provides a mA/V standard output signal.
Average Rating(0)
$159.30
In stock.
T201DCH300-MU
T201DCH300-MU
T201DCH300-MU is an isolated, contact-less direct and alternating TRMS current transducer with ModBUS interface.
Average Rating(0)
$141.60
In stock.
Z202-H
Z202-H
Z202 accept an alternate voltage (10.490 Vac) and provides an isolated analog output (mA or V)
Average Rating(0)
$177.00
In stock.
S100S-1-ST
S100S-1-ST
Dual Power Supply For Current Loop, Power supply. 115/230 Vac
Average Rating(0)
$82.60
Check availability in chat.
Z109S-DI
Z109S-DI
The module Z109S-DI is a power supply unit with galvanic isolator for the current loop. It converts an input signal into a current in the range 0/4.20mA
Average Rating(0)
$116.82
Check availability in chat.
Z110D
Z110D
Z110 is a 4.20mA isolator powered through the input loop. It does not require any auxiliary power supply.
Average Rating(0)
$133.34
Check availability in chat.
SG-3013
SG-3013
The SG-3013 is a RTD input signal conditioning module to transform RTD input to voltage or current output. SG-3013 uses a microprocessor-based transducer, which integrating two high resolution ADCs and an MCU, to acquire the RTD signal. The supported RTD types are Pt100 , Pt1000 , Ni 120 ,Cu100 ,and Cu1000.
Average Rating(0)
$309.00
Check availability in chat.
SG-3016
SG-3016
Signal conditioning for thermocouples , RTDs, strain gages, voltage and current. Output voltage or current , insulation 3000 V , DIN rail mounting . Power 10 ~ 30 Vdc, Extensiometric Gauge Inlet.
Average Rating(0)
$289.00
Check availability in chat.
SG-3071
SG-3071
The SG-3071 is a voltage input to voltage or current output signal conditioning module. It has 3000Vdc three-way isolation for input, output and power. Users can change the input/output range via internal configuration switches.
Average Rating(0)
$239.00
Check availability in chat.
SG-3081
SG-3081
Isolated DC Current Input/Output Module. Provides current input to voltage or current output. Input types are 0~20mA and 4~20mA. Output types are 0~5V,0~10V, 0 ~ 20mA and 4 ~ 20mA
Average Rating(0)
$239.00
Check availability in chat.
Z190
Z190
DC current/voltage Adder/subtracter, allows the addition or subtraction of 2 analog signals and obtain the equivalent output through an analog signal (0-20mA and 4-20mA or 0-1/0-5/0-10 and 2 to 10Vdc). Feeding: 10 to 40Vdc or 19 to 28Vac
Average Rating(0)
$212.99
Check availability in chat.
More results 1 2 Next page View All