USA:
+1619 616 7350
Mobile:
+1619 600 1015

Home/Sensors & Transducers/Signal Conditioning/Analog/Load cells

Load cells

Ver tablas de características de todos los modelos

Products (Total Items: 13 )

Sort by:

K109UI

The K109UI is designed to accept a single channel standard current or voltage process signal input and give a single, isolated voltage or current output.

(0)

$187.97

In stock.

Z-SG

Z-SG is a strain gauge signal converter. Measurements taken using the 6-wires or 4-wires technique are available through Modbus-RTU serial protocol

(0)

$236.71

In stock.

FSH03944

USB520 , High Speed & Resolution External USB Output Kit , Up To 20.5 Bits Noise Free , Strain Gauge mV/V & Amplified +/-10 VDC/4-20 mA Inputs Up to 4800 SPS & Encoder TTL Inputs Up to 10 SPS , 35 mm DIN Clip , Powered Off Of USB 2.0 Only

(0)

$1,898.00

In stock.

FSH03864

IAA200 , Full Bridge Strain Gauge Signal Conditioning Current Transmitter , 4-20 mA Output , 12 mA Offset DIP Switch , Up to 25 kHz Bandwidth , Detachable Screw Terminal Connectors , Metallic Enclosure , Integrated 35 mm DIN Clip

(0)

Discontinued

Check information in Chat.

FSH02126

IAC200 , Non-Amplified Junction Box , 1-4 Channel , Nema 4 Rating , Material - Polyurethane , Standard

(0)

$1,098.00

Check availability in chat.

FSH03912

IDA100 , High Speed & High Resolution Programmable Analog Amplifier w/ Greater Than 1 kHz Noise Rejection & Up To 4800 SPS USB Output , 0-10 VDC Analog Output , Powered By USB , Red Powder Coated Aluminum Enclosure, Integrated DIN Clip

(0)

$1,998.00

Check availability in chat.

TPS01049

IAA100 , Full Bridge Strain Gage Signal Conditioning Voltage Amplifier , +/-5 VDC , +/-10 VDC , 5 VDC Offset DIP Switch , w/ Mating Power/Output Cable , 10 ft Long

(0)

$898.00

Check availability in chat.

QSH02025

IAA200, full bridge strain gauge signal conditioning current transmitter, 0-20 mA output, bandwidth up to 25 kHz, removable screw terminal connectors, metal case, integrated 35 mm DIN clip

(0)

$998.00

Check availability in chat.

Z-SG2

Strain gauge/load cell signal converter. Input for 4 or 6-wire. Input 1~64mV/V settable by DIP-switch or software, analog output configurable 0~20, 4~20 mA, 0~5 or 0~10 Vdc. With advanced functions and flexible measurement management mode.

(0)

Discontinued

Check information in Chat.

ZC-SG

CANopen module of a channel for strain gauge

(0)

$278.48

Check availability in chat.

FSH03863

IAA100 , Full Bridge Strain Gauge Signal Conditioning Voltage Amplifier , +/-5 VDC , +/-10 VDC Output , 5 VDC Offset DIP Switch , Up to 25 kHz Bandwidth , Detachable Screw Terminal Connectors , Metallic Enclosure , Integrated 35 mm DIN Clip

(0)

$675.00

Check availability in chat.

SG-EQ4

4 Channel Junction Circuit / Equalization system for up to 4 load cells (4-wire or 6-wire). PCB board with screw terminals for 4 inputs and 1 output for the summed signals. Include jumpers for configuration. Available IP66 box sold separately

(0)

$97.47

Check availability in chat.

SG-EQ4-BOXPG7

4 Channel Junction Summing Box / Equalization system for up to 4 load cells (4-wire or 6-wire). Includes PCB board with screw terminals SG-EQ4 and IP66 box with cable glands. Include jumpers for configuration

(0)

$334.18

Check availability in chat.