| Technical Specifications |
| Analog input |
| Type of converter D/A | Of successive approximations |
| Voltage input range in linear operation in Single Ended mode | CHx to GND ± 10V max |
| Voltage input range in linear operation in differential mode | CHx to GND -10V min, + 20V max |
| Maximum input voltage | CHx to GND ± 40V max |
| Input current | Vin = + 10V 70µA typical
Vin = 0V -12µA typical
Vin = -10V -94µA typical |
| Number of channels | Software selectable 8 common terminal/4 differentials |
| Input ranges in Single Ended mode | ± 10V, G = 2 |
| Input ranges in differential mode | Software selectable ± 20V, ± 10V, ± 5V, ± 4V, ± 2.5V, ± 2.0V, ± 1.25V, ± 1.0V, |
| Performance | Software paced 50 S/s
Continuous review 1.2kS/s
Review for 4K samples (FIFO) 8kS/s |
| Resolution | Differential 12 bits
Single ended 11 bits |
| Trigger source | Selectable by External Digital Software: DIO0-DIO3 |
Analog Output | Type of converter D/A | PWM | | Resolution | 10 bits, 1 in 1024 | | Maximum output range | 0 ~ 5 Volts | | Number of channels | 2 voltage outputs | | Performance | Software paced 100 S/s Mode of a channel in use
50 S/s Two channels in use | | Maximum voltage | Without charge Vs
Load of 1mA
0.99 * Vs
5mA load
0.98 * Vs | | Exit | Each output D/A: 30mA | Digital Input/Output (Screw terminal DIO3: 0) | Kind | Discreet, compatible with 5V/TTL | | Number of I/O | 4 | | Configuration | 4 bits, Programmable independently for input or output | | Input voltage (1) | 3.0V min, 15.0V absolute max | | Input voltage (0) | 0.8V max | | Output voltage (Note 4) | No load Vs - 0.4Vmin, typical Vs | | Load of 1mA | Vs - 1.5V | | On/reset status | Input mode (High impedance) | | Digital Input/Output (DB37) | Kind 82C55 | | Number of I/O | 24 | | Configuration | 2 banks of 8 and 2 banks of 4, or 3 banks of 8 | | Pull-up/pull-down configuration | All pins have 47k resistors connected to Vs. They are available for ground. Hardware-selectable with zero ohms resistors | | Input voltage (1) | 2.0V min, 5.5V absolute max | | Input voltage (0) | 0.8V max, -0.5V absolute min | | Current output voltage (IOH = -2.5mA) | 3.0V min | | Current voltage output (IOL = 2.5mA) | 0.4V max | | Environmental characteristics | | Operating and storage temperature | -40 ~ 85 ° C | | Moisture | 0 ~ 90% non-condensing | | Mechanical | | Dimensions | 157mm (L) x 102mm (W) x 40mm (H), including connectors | | USB cable length | Maximum: 3 Meters | | Length of the user connection | Maximum: 3 Meters | | |
