ZE-2AI

ZE-2AI is a I/O module with 2 analog inputs, slave for Modbus TCP-IP communication (Ethernet) and Modbus RTU. The module insures server mode for the Ethernet communication port with ModbusTCP-IP protocol: Ethernet port (10-100 Mbps), 4 client, Embedded Webserver. ZE-2AI allows the possibility to set the parameters via internet (Web-server) or USB (Easy setup software) and also Modbus registers repetition on TCP-IP protocol (1 Ethernet port) and Modbus RTU (2 independent RS485 slave serial ports). Baud rate for ModbusRTU starts from 1.200 up to 115.200 baud. Analog inputs can be setted in voltage or current scales.

• Mixed I/O Modules for analog and digital signals
• High Performance Modules with 100 MHz ARM processor
• MODBUS TCP-IP Protocol
• MODBUS RTU Protocol on bus/clamps
• Built-in web server for remote visualisation and configuration of the I/O values
• Extended range for input voltage up to 30 V
• 16-bit ADC, acquisition speed configurable from 5 to 300 ms
• Software EASY SETUP through USB port