| Technical specifications |
| GENERAL DATA |
| Supply | 9..40 Vdc, 19 a 28 Vac (50-400 Hz) |
| Supply | 10..40 Vdc, 19..28 Vac (50-60 Hz) |
| Absorption | < 1 W |
| Isolation | 4 kVac (from / to power circuits) _1.5 kVac (other circuits) |
| Status indicators | Power, Error, Communication on RS485 port |
| Interfaces | No. 1 RS485 port on the backplane as an alternative to the analogue output _Nr. 1 RS232 port on 3.5 mm frontal jack (baud rate, address, parity, data / stop bit) |
| Supported protocols | ModBUS RTU |
| Response time | < 10 ms |
| Accuracy class | 0.5% input, 0.1% output |
| Thermal drift | 100 ppm / K |
| Settings | DIP switch (address, baud rate, line termination, input range) _EASY SETUP, ZNET Mounting rail DIN 35 mm |
| Terminal Connections | extractable screws, banana connectors |
| Temperature | operating temperature -20.65 ° C |
| Dimensions (LxHxP) | 35 x 100 x 112 mm |
| Weight | 180 g |
| ENTRANCE DATA |
| Channels | 1 |
| Guy | Alternating voltage up to 850 Vac, Input impedance 4 MO / V, Frequency 30-60Hz _Continuous voltage up to 1,200 Vdc, Input impedance 4 MO / V |
| OUTPUT DATA |
| Channels | 1 |
| Type | Analog Type: Current 0 / 4..20 mA, max load 500 O _ Voltage 0..10 Vdc load min. 1,000 O |
| STANDARD |
| Certification | CE |
| Norms | EN 61000-6-4, EN 61000-6-2, EN 61010-1 |
