Industrial Bridge/Gateway - Serial Device Server. Communication device with Bridge/Ethernet/Modbus Gateway (Modbus TCP-Modbus RTU) and Virtual COM. Equipped with 1-port Ethernet and 2 serial ports (RS485/RS232/RS485). Power Supply 11~40Vdc/19~28Vac. Z-KEY is a device that can extend networks and allow the transfer of process data between different levels of IT and industrial communication architecture. Z-KEY offers signals transmission between ModBUS TCP-IP/ModBUS RTU in different modes, increasing the number of connected nodes and network distances. The device can also extend the serial network operating as a transparent Remote virtual COM to the serial communication protocol.
Equipped with nr. 1 10/100 Tx Fast Ethernet port and nr. 2 serial ports (RS232/RS485, RS485), Z-KEY offers multiple methods of configuration through DIP-switches, web server, software tools (SESC, SDD, EASY Z-KEY) or via mobile app. Z-KEY advanced functions include supporting SENECA IoT Server "Cloud BOX", advanced serial diagnostics, "Quarantine mode" with time settable for “in fail” devices.
Features:
- CPU ARM 32 bit
- Possibility of configuration via Web-server.
- Micro SD card slot, Max 32 GB (Optional) for custom webserver and FTP server pages.
- One Ethernet 10-100 Mbits/s port
- One RS485 port.
- One RS485/RS232 commutable port.
- One USB port.
- 1500 VA power insulation with respect to the remaining low voltage circuits.
- Facilitated power and serial line cabling via Seneca bus that can be housed in the IEC EN 60715 omega guide.
- Pull-out terminals, section 2.5 mm2.
- Power indication, RS485/RS232 Rx and Tx, ETHERNET connection and activity on SD card via LED on front panel.
- Modbus Gateway from Modbus TCP to Modbus RTU: Ethernet/RS485 communication to remotely control modules connected to the Modbus RTU ports with the possibility of setting RS485 ports in Modbus master, Modbus slave mode.
- Modbus TCP-IP/Modbus RTU bridge in real time.
- Remote serial port (COM port) transparent to protocol.
- Baud rate for Modbus RTU settable from 1200 to 115200 baud.
- Firmware update via Web Server/FTP Server/microSD card.
MANDATORY ACCESSORY IF YOU NEED 2 COMMUNICATION PORTS:
- Z-PC-DINAL2-17.5:
Head terminal + 2 slot 17.5mm DIN rail bus system for Z-PC Line I/O fast mounting and connection - Z-PC-DIN2-17.5:
2 slot 17.5mm DIN rail bus system for Z-PC Line I/O fast mounting and connection - Z-PC-DIN8-17.5:
8 slot 17.5mm DIN rail bus system for Z-PC Line I/O fast mounting and connection
