TECHNICAL SPECIFICATIONS |
Electrical Specifications |
Power supply |
10..40 Vdc / 19..28 Vac / 50-60 Hz |
Power consumption |
1,5 W |
Isolation |
1.500 Vac (3 way) |
Power transducers |
Yes |
Status Indicators |
Power Fail Rx / Tx Active output |
Protection Degree |
IP20 |
Thermomechanical Specifications |
Operating Temperature |
-10..+65 °C |
Dimension (W x H x ) |
17.5 x 100 x 112 mm |
Weight |
About 140 g |
Enclosure |
Nylon 6 with 30% glass-fiber, V0 self-extinguished class |
Connections |
-Removable terminals block, plug in connectors, max wire size 2,5 mm2 -Rear IDC10 connector for Z-PC backplane |
Mounting |
35 mm DIN rail guide |
Communication, Memory process |
Interface |
2 wire RS485 |
Speed |
Up to 57.600 bps |
Protocol |
ModBUS RTU slave |
Communication Time |
< 10 ms (38400 baud) |
Distance |
Up to 1.200 m |
Connectivity |
Max 32 nodes |
Data Memory |
EEPROM for the configuration parameters, retention time 10 years, N° 5 registers 16 bit, N° 5 bit overflow |
Signals |
Channel Numbers |
5 |
Type |
SPST N.O. relay output with common line Max rated current: 5 A Max switching voltage: 250 Vac Relay working voltage: 24 Vdc Relay absorbed current: 9 mA Release time delay: 5 / 2 ms |
Configuration |
DIP switches |
Baud rate, node, parity, serial port, bit stop, termination line |
Software |
Z-NET3 (Iec 61131) EASY Z-D-IN (plug&play |
Configuration |
Approval |
CE, RINA |
Norms |
EN 50081-2; EN 55011; EN 50082-2; EN 61000-2-2/4; EN
50140/141; EN 61010-1 |