High speed infrared sensor xp10 model, M12 connector, R4 retroreflective optical block for a maximum range of 15 feet, NPN and PNP output, power supply from 12 to 24Vdc, response time 10 microseconds, buttons for configuration The SMARTEYE® X-PRO XP10 registration mark sensor reliably detects the position of registration marks on various webs of material running at very high speed. The switching frequency of the sensor is 50Khz with a repetability of 5us. This provides unprecedented stability of the mark position. It is ideal in processes where timing is critical such as high-speed printing. Not all high-speed applications are registration mark applications. With the press of a few buttons this dual-function sensor can be configured to function as a standard photoelectric sensor for any high-speed application. The sensor is primarily used with glass and plastic fiber optics but can be configured with any of our optical blocks to tailor it to your application. In addition, this sensor has 5 memory locations for the storage and retrieval of sensor set-up's. Retrieval of settings can be done remotely via a one wire interface. It can either be side mounted or Din rail mounted. Epoxy encapsulated, it is rugged and vibration proof.
AGS™ AUTOMATIC GAIN SELECT
This unique feature provides automatic digital selection of amplifier gain based upon your sensing requirements. AUTOSET ADJUSTMENT
The AUTOSET adjustment routine only requires the push of one button, one time. Oftentimes, in dynamic operating conditions, all you have to do is push the button for a perfect setting. This is dependent upon at least a 4:1 duty cycle ratio. AUTOSET/ REMOTE PROGRAMMING (Patent No. 6,950,778)
Remotely AUTOSET or program the sensor’s multiple options by applying a sequential momentary contact closure from the AUTOSET input wire to negative as shown in the wiring diagram. The remote AUTOSET command will duplicate the last manual AUTOSET. EDR° (Patent No. 5,621,205)
Another unique feature is the digitally controlled EDR (Enhanced Dynamic Range) circuit. It prevents dark state saturation and expands the operating range without reducing amplifier gain. MOUNTING OPTIONS
Built-in DIN rail “Snap-On” design, through hole, or bracket mount. 10 LED DUAL-FUNCTION BAR GRAPH
Contrast Indicator – Provides “at-aglance” performance data.
Status Indicator – Displays status of selectable options: Lock – When this option is enabled the sensor becomes tamperproof. Note: The Remote AUTOSET and Remote Programming are not affected by the Lock option. Mark - When this feature is enabled, the sensor buttons function like a Mark•Eye® PRO: Push and hold yellow button for light background and red button for dark background. Pulse Stretcher (PS) – When the “OFF” delay pulse stretcher is enabled, the output duration is extended by 10 or 20 milliseconds (not additive). Enabling the Timer allows ample time for the controller to respond. The time durations of the gap between marks must be longer than the selected delay. Enable – This option provides access to MEM-1 thru MEM-5 locations and enables remote programming. NOTE: Any changes to the sensor will automatically be saved to current MEM # location. HIGH SPEED
10µs response time when responding to light or dark state. 5µs repeatability. CONNECTIONS
Built-in 5-pin M12 connector, or 6' Cable.
