Specifications |
Digital Input |
Input Channels |
8 (Differential) |
Input Type |
Wet Contact (Sink, Source)
|
On Voltage Level |
+10 VDC ~ +50 VDC |
Off Voltage Level |
+4 VDC Max |
Input Impedance |
10 kO |
Counters |
Max. Count |
65535 (16 bits) |
Max. Input Frequency |
50 Hz |
Min. Pulse Width |
10 ms
|
Over Voltage Protection |
+70 VDC
|
Digital Output |
Output Channels |
8 |
Output Type |
Isolated Open Collector (Sink) |
Max. Load Current |
300 mA/channel at 25 °C Direct drive power relay module |
Output Voltage |
+10 VDC ~ +40 VDC |
Overvoltage Protection |
60 VDC |
Overload Protection |
1.1 A |
Short-circuit Protection |
Yes |
System |
CPU |
16-bit CPU
|
SRAM |
512 KB |
Flash Memory |
512 KB |
EEPROM |
16 KB |
Watchdog |
Yes |
Communication |
PoE Ethernet Port |
10/100 Base-TX (With Link, Activity LED Indicator) and automatic MDI/MDI-X |
2-way Isolation
|
I/O |
3750 VDC
|
EMS Protection
|
ESD (IEC 61000-4-2) |
4 kV Contact for each terminal |
EFT (IEC 61000-4-4) |
+/-2 kV for Power |
LED Indicators
|
PoE |
PoE On |
L1 |
System Running |
L2 |
Ethernet Link/Act |
L3 |
Ethernet 10/100M Speed |
Power Requirements
|
Reserve Polarity Protection |
Yes |
Powered from terminal block |
Yes, 12 ~ 48 VDC |
Powered from PoE |
Yes, IEEE 802.3af, Class1 |
Consumption |
4.3 W |
Mechanical
|
Dimensions (W x H x D) |
123 mm x 72 mm x 35 mm |
Installation |
DIN-Rail or Wall mounting |
Environment
|
Operating Temperature |
-25°C ~ +75 °C |
Storage Temperature |
-30°C ~ +80 °C |
Relative Humidity |
5 ~ 90% RH, non-condensing |
Software Specifications |
Functions |
Rule Configuration Website |
Access Web server on WISE controllers to edit and upload logic rules through web browser. |
36 IF-THEN-ELSE Logic Rules |
3 IF conditions with AND or OR operators |
3 THEN actions and 3 ELSE actions |
48 Internal Registers |
Hold temporary variables and read/write data via Modbus/TCP address. |
12 Timers |
Delay / Timing functions. |
12 Emails |
Send Email messages to pre-set Email receivers. |
12 CGI Commands |
Send pre-set CGI commands. |
12 Recipes |
Set up THEN/ELSE action groups. |
8 P2P remote modules |
Set up the connection information for the remote WISE modules. |
Modbus/ TCP Protocol |
Real time control and monitoring I/O channels and system status of controllers via SCADA software. |
IF Conditions |
DI Channel |
ON, OFF, ON to OFF, OFF to ON, Change |
Internal Register |
=, >, <, >=, <=(value) |
DI Counter |
=, >, <, >=, <=(value), Change |
DO Counter |
Timer |
Timeout, Not Timeout. |
P2P |
DI, AI, DI counter, DO counter, IR |
Rule Status |
Enable, Disable. |
THEN / ELSE Actions |
DO Channel |
ON, OFF, Pulse Output |
Internal Register |
Change the value |
DI Counter |
Reset |
DO Counter |
Timer |
Start, Stop |
Email |
Send |
CGI Commands
|
Recipe |
Execute |
P2P |
DO(On/Off), AO, IR |
Rule Status |
Enable, Disable. |