| Specifications |
| Modelo SDS1202X-E |
| Bandwidth | 200 MHz |
| SamplingRate (Max.) | Two channel series have a single 1 GSa/s ADC, four channel series have two 1 GSa/s ADCs. When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per pair is active, that channel has sample rate of 1 GSa/s |
| Channels | 4 (four channel series) 2+EXT (two channel series) |
| Memory Depth (Max.) | 7 Mpts/CH (not interleave mode);14 Mpts/CH (interleave mode) |
| Waveform Capture Rate (Max.) | 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode) |
| Trigger Type | Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video |
| Serial Trigger and decoder (Standard) | IIC, SPI, UART/RS232, CAN, LIN |
| 16 Digital Channels (four channel series only, | option) Maximum waveform capture rate up to 1 GSa/s, Record length up to 14 Mpts/CH |
| USB AWG module (four channel series only, option) | One channel, 25 MHz, sample rate of 125 MHz, wave length of 16 kpts |
| Bode plot ( four channel series only) | Minimum start frequency of 10 Hz, minimum scan bandwith of 500 Hz, maximum scan bandwidth of 120 MHz (dependent on Oscilloscope and AWG bandwidth), 500 maximum scan frequency points |
| USB WIFI adapter (four channel series only, option) | 802.11b/g/b, WPA-PSK, the adapter must be supplied by Siglent to ensure working |
| I/O | USB Host, USB Device, LAN, Pass/Fail, Trigger Out, Sbus (Siglent MSO) |
| Probe (Std) | 4 pcs passive probe PP510 4/2 pcs passive probe PP215 |
| Display | 7 inch TFT -LCD (800x480) |
| Weight | Four channel series: Without package 2.6 Kg; With package 3.8 Kg Two channel series: Without package 2.5 Kg; With package 3.5 Kg |
