Sensor SmartEye Retro Smart RSRC-1

USA:
+1619 616 7350
Mobile:
+1619 600 1015

Home/Sensors & Transducers/Sensors/Photoelectric/Clear Objects Sensor / RSRC-1

RSRC-1

0 Review(s)

Price: $225.89

In stock.

Part number:RSRC-1

Quantity

Description
Customer reviews
Specifications

Recommended accessories

RetroSmart retroreflective sensor with 6in (152mm) pigtail with 5-pin connector. Optimum range is 6in. to 8ft (15.24cm to 2.4m) distance to the AR6151 reflector. 10 to 30 VDC, polarity protected. NPN and PNP output transistor

Many of today’s industrial control functions require a sensor that can provide dependable detection of position or presence of transparent containers. The RetroSmart™ will provide a single, non-chattering output for each transparent container that passes by, independent of size, shape, empty, or full.

Imagine… just point the RetroSmart™ sensor’s red, narrow light beam at the reflector and push the AUTOSET button one time. Now sit back and watch the sensor flawlessly detect any size PET bottle filled with water, with no need to worry about burn-through or double signals. When the efficiency of an entire production line depends on the performance of a photoelectric sensor, the RetroSmart™ is the smart choic

Characteristics:

100µs response time
Polarized Retroreflective - from a few inches up to 8 feet
Remote AUTOSET
Light State Tracking
Button lockout
Cable or quick disconnect versions
Immune to most abient light, including strobes

Technical specifications
MODEL SPECIFIC
Adjustment Type	Push Button
Connection Type	Connector, 5 pin M12 pigtail
Housing Type	Rectangular
FAMILY SPECIFIC
Supply Voltage	10 to 30 VDC Polarity Protected
Current Requirements	50mA (exclusive of load)
Output Transistors	(1) NPN and (1) PNP sensor output transistor: NPN: Sink up to 150mA PNP: Source up to 150mA Continuous short-circuit protection Outputs protected from pulsing during power up
Remote AUTOSET Input	Opto-isolated momentary sinking input (10mA)
Response Time	Light State = 100 microseconds Dark State = 100 microseconds
LED Light Source	Red 660nm Pulse modulated
Push Button Control	"One-Touch" AUTOSET pushbutton setup Tweak adjustments with "up" or "down" buttons LST (Light State Tracking) Enable/Disable Light "ON"/Dark "ON" Selection
Range	Optimum from 6in. to 8ft. (15.24cm to 2.4m) distance to the AR6151 reflector
Hysteresis	Two bars as displayed on Contrast Indicator Light State Switch = 5 Dark State Switch = 3
Diagnostic Indicators	Contrast Indicator - Display scaled reading of sensor's response to contrasting light levels (light vs. dark) on an 8-bar LED display Red LED Indicator - LOCK Green LED Indicator - LST (Light State Tracking) Red LED Indicator - OUTPUT
Light Immunity	Responds to sensor's pulse-modulated light source, resulting in high immunity to most ambient light, including high intensity strobes
Ambient Temperature	-40°C to 70°C (-40°F to 158°F)
Rugged Construction	Chemical resistant, high-impact polycarbonate housing Waterproof ratings: NEMA 6 and IP67