| TECHNICAL DATA |
| GENERAL DATA |
| Power Supply | 9 – 32 Vdc |
| Rx/Tx power consumption | @12Vdc Rx ~ 30 mA; Tx ~200 mA |
| Max power consumption | 5 W |
| Hot swapping | No |
| LED status indicators | ONAIR/On/Data |
| Operating bandwidth | 169.400 – 169.475 Mhz |
| Channnels | 1@CH50kHz
3@CH25kHz
[email protected] |
| Canalization | 12,5-25-50-kHz |
| Modulation | 9K00F1D or 18K0F1D (NBFM/GFSK) |
| Data rate (radio) | 4.800 bps (@12,5 kHz canalization)
9,6 kbps (@25 kHz canalization)
19.200bps(@50kHz canalization) |
| Crypting | AES 128 bit |
| RTC | Built-in for custom applications |
| Antenna | ?/4 - ?/2 or Yagi 3 elements |
| Connectors | Removable terminals |
| Dimensions | 90 x 100 x 40 mm |
| Operating temperature | -30..60°C |
| Weight | 210 g |
| Case | Aluminum |
| Protection degree | IP20 |
| Mounting | Wall/Penal mounting |
| Built-in I/O | "Nr.1 Digital Input, 5-24 Vdc o 3-20 Vac. Zinp. 2.2 kO
(optoisolated)
Nr.1 Relay Digital Output, N.O. 24 Vac @ 0,5 A o 32 Vdc
@ 1 A |
| Operating mode | Point-to-point, Point-to-multipoint, broadcasting, digital repetear, routing table support for addressing |
| Settings (software) | RM169-1-SETUP |
| COMMUNICATION |
| Interfaces | RS232/RS485 |
| Protocols | Protocol-transparent (max buffer 1024 bytes) |
| Data rate | From 1,2 to 57,6 kbps |
| Output power (trasmitter) | 50-150-500 mW |
| Frequency deviation | ±1.8 [email protected] kHz
±3.8kHz@25 kHz |
| Receiver (type) | CLASS 2 - LBT, AGILITY |
| Input sensitivity (receiver) | BER < 10-2
<-105dBm@50 kHz
<-107dBm@25 KHz
<[email protected] kHz |
| Communication mode/Data format | Half/Full Duplex |
| Distance range | Up to 10 km in open field with directive antenna |
| STANDARD |
| Approvals | CE |
| Norms | EN 300 220-1 v2.3.1 , EN 300 220-2 v2.3.1, Direttiva RED 2014/53/UE |
| Countries | AT, BE, CY, CZ, DK, EE, FI, FR, DE, GR, HU, HR, IE, IT, LV, LT,LU, MT, NL, PL, PT, SK, SI, ES, SE, GB, IS, LI, NO, CH, BG,RO, TR |
