SPECIFICATIONS |
Hardware |
ESD Protection | 4 kV class A |
PROFIBUS Interface |
Controller | Profichip VPCLS2 |
Transceiver | ADI ADM2486 |
Connector | 9-pin female D-Sub |
Baud Rate (bps) | 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M |
Transmission Distance (m) | Depend on baud rate (for example, max. 1200 m at 9.6 kbps ) |
Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic |
Protocol | DP-V0 |
LED |
Round LED | PWR LED, RUN LED |
Power |
Power supply | Unregulated +10 ~ +40 VDC |
Protection | Reverse polarity protection, Over-voltage brown-out protection |
Power Consumption | 1 W |
I/O |
Digital Output | 8 Channels (Sink), Non-Isolated with common ground,Load Voltage: +10 ~ +30V,Maximum Load Current: 30mA w/o Short-Circuit Protection |
Digital Input | 16 Channels (Sink or Source), Non-Isolated with common ground(or source), Off Voltage Level: +1V Max. On Voltage Level: +4 ~ +30V |
Mechanism |
Installation | DIN-Rail |
Dimensions | 91 mm x 128 mm x 52 mm (W x L x H) |
Environment |
Operating Temp. | -25 ~ 75? |
Storage Temp. | -30 ~ 85? |
Humidity | 5 ~ 95% RH, non-condensing |