Industrial IoT Wireless Tilt And Inclinometer Sensor
Introducing NCD’s Industrial IoT Wireless Tilt and Inclinometer Sensor, boasting up to a 2 Mile range using a wireless mesh networking architecture. This sensor incorporates a high-accuracy acceleration sensor for measuring tilt and inclination angle. These acceleration changes are used to determine mechanical movement (tilt and inclination). When Roll and Pitch angle exceeds the user define a threshold, this device will send a wireless message to a remote gateway or modem and then go back to sleep for a pre-configured period of time. It makes extensive use of interrupts to enter the lowest possible power state while sleeping. Also can send data once tilt has been detected and at regular intervals to “Check-in,” letting you know the sensor is still in operation and ready to go to work.
Advanced Feature Settings
Numerous configuration parameters available that may be fine-tuned for your specific application. Set parameters for Roll and Pitch to trigger alerts when the sensor exceeds these predefined thresholds.
Powered by just 4 AA batteries and an operational lifetime of 600,000 wireless transmissions, 10-year battery life can be expected depending on environmental conditions and the data transmission interval.
The long-range, price, accuracy, battery life and security features of Industrial IoT Wireless Tilt and Inclinometer Sensor make it an affordable choice that exceeds the requirements for most of the industrial as well as consumer market applications.
Highlights
- Industrial Grade IP65 Tilt Sensor with Roll and Pitch Detection
- Configurable Roll and Pitch Angle Parameters
- Uses Interrupts for Tilt detection with very little power consumption
- Measuring range: Roll: ±90°, Pitch: ±90° ( Accuracy ±2°)
- Angle detection resolution ±0.5° for high-precision application
- Operating Temperature Range -40 to +85 °C
- Superior LOS Range of up to 28 miles with 900MHz High-Gain Antennas (Sold Separately)
- Interface to Raspberry Pi, Microsoft Azure, Arduino and More
- Example Software for Visual Studio and LabVIEW
- Wireless Mesh Networking using DigiMesh®
- 256 Sensor Node per Network
- Open Communication Protocol for custom interfacing applications
- Powered By 4-AA Batteries (Not Included)
