| Technical Specifications |
| Current Requirements: |
30mA (exclusive of load) |
| Remote AUTOSET Input: |
Momentary sinking input with opto-isolation (10 milliamps) |
| Response Time: |
Light State response = 600µs (1,100µs, Thru-Beam)Dark State response = 600µs (1,100µs, Thru-Beam) |
| Light/Dark "ON" Operation: |
Light “ON” achieved by connecting white wire to negative leadDark “ON” achieved by connecting white wire to positive lead |
| Range: |
Dependent on model, see Selection Guidelines Note: 5 VDC models, range reduced by 10% |
| Hysteresis: |
Approximately 20% of signal |
| Light Immunity: |
Responds to sensor’s pulse modulated light source, resulting in high immunity to most ambient light, including high intensity strobes |
| Diagnostic Indicators: |
Red LED = Output StatusGreen LED = Power “ON” |
| Ambient Temperature: |
-40°C to 70°C (-40°F to 158°F) |
| Rugged Construction: |
Chemical resistant, high-impact polycarbonate housingWaterproof ratings: NEMA 4X, IP66 |
