Specifications |
Bus Interface |
Type | PCI bus, 5 V, 33 MHz, 32-bit, plug and play |
Board No. | By DIP switch |
CAN Interface |
Controller | NXP SJA1000T with 16 MHz clock Microprocessor inside with 80186 80MHz |
Transceiver | NXP 82C250 |
Channel number | 1 |
Connector | 5-pin screwed terminal block (CAN_L, CAN_SHLD, CAN_H, N/A for others) |
Baud Rate (bps) | 125 k, 250 k, 500 k |
Transmission Distance (m) | Depend on baud rate (for example, max. 1000 m at 50 kbps ) |
Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
Terminator Resistor | Jumper for 120 ? terminator resistor |
Specification | ISO-11898-2, CAN 2.0A and CAN 2.0B |
Protocol | DeviceNet Volumn I ver2.0, Volumn II ver2.0 |
LED |
Round LED | Green LED, Red LED |
Software |
Driver | Windows 2K/XP/7/8 (32-bit/64-bit OS) |
Library | VB 6.0, VC++ 6.0, BCB 6.0, Visual Studio .NET |
Power |
Power Consumption | 300 mA @ 5 V |
Mechanism |
Dimensions | 138mm x 22mm x 92mm (W x L x H) |
Environmental |
Operating Temp. | -0 ~ +60 °C |
Storage Temp. | -20 ~ +70 °C |
Humidity | 5 ~ 85% RH, non-condensing |