Specifications |
Hardware |
CPU | 80186, 80 MHz or compatible |
SRAM/Flash/EEPROM | 512 KB / 512 KB / 2 KB |
Bus Interface |
Type | Universal PCI supports both 5 V and 3.3 V PCI bus |
Board No. | By DIP switch |
Bus Interface |
Controller | NXP SJA1000T with 16 MHz clock Microprocessor inside with 80186 80 MHz |
Transceiver | NXP 82C250 |
Channel number | 1 |
Connector | 9-pin male D-Sub (CAN_L, CAN_SHLD, CAN_H, N/A for others) |
Baud Rate (bps) | 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M |
Transmission Distance | Depend on baud rate (for example, max. 1000 m at 50 kbps) |
Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
Terminator Resistor | Jumper for 120 ? terminator resistor |
Specification | ISO-11898-2, CAN 2.0A and CAN 2.0B |
Protocol | CANopen DS-301 ver4.02, DS-401 ver2.1 |
LED |
Round LED | Green LED, Red LED |
Software |
Driver | Windows 2K/XP |
Library | VB 6.0, VC++ 6.0, BCB 6.0 |
Power |
Power Consumption | 300 mA @ 5 V |
Mechanism |
Dimensions | 138 mm x 22mm x 105 mm (W x L x H) |
Environmental |
Operating Temp. | -0 ~ +60 °C |
Storage Temp. | -20 ~ +70 °C |
Humidity | 5 ~ 85% RH, non-condensing |