Specifications |
Item |
CPU |
Microprocessor inside with 80186 80MHz |
CAN Port Channels |
1 |
CAN Transceiver |
Phillips 82C250 |
CAN Controller |
Phillips SJA1000T with 16MHz |
CAN Connector |
9-pin D-sub female connector |
Support Protocol |
CAN 2.0A/2.0B |
Isolation |
2500 Vrms on the CAN side |
Board Number |
Selectable board number by DIP switch |
Terminator Resistor |
Selectable 120? terminator resistor by jumper |
NVRAM |
31 bytes |
DPRAM |
8K bytes |
Flash/SRAM/EEPROM |
512K/512K/2K bytes |
Software |
Driver |
Provide Windows 98/ME/NT/2K/XP |
Baud Rate Configure |
5K, 10K, 20K, 25K, 50K, 100K, 125K, 200K, 250K, 500K, 800K and 1Mbps |
Timestamp |
Timestamp of CAN message with at least ±1ms precision |
Transmit Buffer |
256 records CAN message transmission buffer size |
Receive Buffer |
2048 records CAN message reception buffer size |
General |
Interface |
Universal PCI supports both 5V and 3.3V PCI bus |
RTC |
Real time clock inside |
LEDs |
Rx/Tx LED: Rx/Tx data, Err LED: CAN error occur |
Power Consumption |
+ [email protected] 300 mA |
Environment |
Operating Temp. |
0°C~60°C |
Storage Temp. |
-20°C~80°C |
Humidity |
0~90% non-condensing |
Dimensions |
127mm x 121mm (W x H) |