| Specifications |  Â
| Technology |
| Standards | IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) |
| Processing Type | Store & forward, wire speed switching |
| MAC Addresses | 1024 |
| Memory Bandwidth | 3.2 Gbps |
| Frame Buffer Memory | 512 Kbit |
| Flow Control | IEEE802.3x flow control, back pressure flow control |
| Interface |
| RJ-45 Ports | 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| LED Indicators | Power, Link/Act , 10/100M, Power Device is detected |
| Ethernet Isolation | 1500 Vrms 1 minute |
| +/-6 kV EMS Protection | Yes |
| Fiber Interface (100 Base-FX; SC/ST type) |
| Multi-Mode | Multi mode fiber cables:50/125, 62.5/125 or 100/140 µm Distance :2 km, (62.5/125 µm recommended) for full duplex Wavelength : 1300 or 1310nm Min. TX Output:- 20 dBm Max. TX Output: -14 dBm Max. RX Sensitivity: -32 dBm Max. RX Overload: -8 dBm Budget: 12 dBm |
| PoE Output |
| PoE Compliance | 100% IEEE 802.3af compliant |
| PoE Classification | PSE (Power Sourcing Equipment) |
| PoE Voltage | +48 VDC depending on power input |
| PoE Power Up | to 15.4 watts per channel |
| PoE Operation | Automatic detection and power management |
| Mechanical |
| Casing | Plastic (Flammability UL 94V-0) |
| Dimensions (W x L x H) | 31 mm x 157 mm x 113 mm |
| Installation | DIN-Rail |
| Environmental |
| Operating Temperature | -30 °C ~ +75 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing |