Specifications |
Technology |
Standards |
IEEE 802.3, 802.3u, 802.3x |
Processing Type |
Store & forward, wire speed switching |
MAC Addresses |
1024 |
Memory Bandwidth |
1.4 Gbps |
Flow Control |
IEEE802.3x flow control flow control |
Interface |
RJ-45 Ports |
10/100 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
Fiber Port |
100 Base-FX(Single-mode; SC connector) |
LED Indicators |
10/100M, Link/Act, Full duplex(Fiber Port) |
Ethernet Isolation |
1500 Vrms 1 minute |
Frame Ground for EMS Protection |
Yes |
Fiber Optic |
Single-mode fiber cables |
8.3/125, 8.7/125, 9/125 or 10/125 µm |
Distance |
15 km, (9/125 µm mrecommended) for full duplex |
Wavelength |
TX: 1310, RX: 1550 nm for NS-200WDM-A TX: 1550, RX: 1310 nm for NS-200WDM-B |
Min. TX Output |
-14 dBm |
Max. TX Output |
-8 dBm |
RX Sensitivity |
-31 dBm |
Ethernet Transmission distance |
Ethernet |
2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm |
Fast Ethernet |
2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm |
Power |
Input Voltage Range |
+12 ~ +48 VDC (Non-isolation) |
Power Consumption |
0.12 [email protected] VDC, +/- 5% arrowed with 100M Full duplex |
LED Indicator |
Yes |
Protection |
Power reverse polarity protection |
Frame Ground for EMS Protection |
Yes |
Connection |
3-Pin Removable Terminal Block |
Mechanical |
Casing |
Plastic (Flammability UL 94V-0) |
Dimensions (W x L x H) |
32.30mm x 99.00mm x 77.50mm (W x H x D) |
Installation |
DIN-Rail |
Environment |
Operating Temperature |
0 °C ~ +70 °C |
Storage Temperature |
-20 °C ~ +85 °C |
Ambient Relative Humidity |
10% ~ 90% RH, non-condensing |