Specifications |
Technology |
Standards | IEEE 802.3, IEEE 802.3u, IEEE802.3x |
Processing Type | Store & forward wire speed switching - no delays |
MAC addresses supported | 2K |
Memory Bandwidth | 3.2 Gbps |
Flow Control | IEEE802.3x flow control, back pressure flow control |
Redundant strategy | STP, Ring(ICP DAS) |
Protocol | VLAN, QoS, Port Trunk, SMTP, TELNET, SNMP |
Interface |
RJ45 port | 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDIX connection |
Fiber Optics Port | 100 Base-FX(Multi-mode; ST connector) |
LED Indicators | 10/100M, Link/Act/Backup, Full duplex/Half duplex(Fiber Port) |
Ethernet Isolation | 1500 Vrms 1 minute |
Frame Ground for EMS Protection | Yes |
Ethernet Transmission distance | Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm |
Fiber Optic Transmission distance | Multi mode fiber cables:50/125, 62.5/125 or 100/140 µm Distance :2 km, (62.5/125 µ recommended) for full duplex Wavelength : 1300 or 1310nm Min. TX Output: -20 dBm Max. TX Output: -14 dBm RX Sensitivity: -34 to -31 dBm |
Ethernet Cables | 10 Base-T (Cat.3, 4, 5 UTP cable; 100m Max.) 100 Base-TX (Cat.5 UTP cable; 100m Max.) |
Management interface | Console, DIP/Rotary Switch |
Alarm output | Relay |
Power |
Input Voltage Range | +12 VDC ~ +48 VDC (Non-isolation redundant input) |
Power Input isolation | 1KV |
Alarm Contact | One relay output with current carrying capacity of 2A @ 30 VDC |
Power consumption | 0.3A@24Vdc (+/- 5%, arrowed) |
Protection | Power reverse polarity protection |
Frame Ground for EMS Protection | Yes |
Connection | 7-Pin Removable Terminal Block |
Mechanical |
Case | Metal |
Environmental rating | IP20 |
Dimensions | 72.5mm x 110mm x 102mm (W x H x D) |
Cable Included | CA-090510 x 1 |
Installation | DIN rail mount; Wall Mounting |
Environmental |
Operating temperature | 0 °C~ +70°C |
Storage Temperature | -20 ~ +85°C |
Relative Humidity | 10% to 90% non-condensing |