| Technical Specifications |
| MEWLC |
| Supply Voltage: | 10 to 30 VDC Polarity Protected |
| Current Requirements: | 45mA (exclusive of load) |
| Output Transistors: | (1) NPN and (1) PNP sensor output transistorSensor outputs can sink or source up to 105mA (current limit)All outputs are continuously short circuit protected. |
| Response Time | Light/Dark state response = 100 microseconds |
| Hysteresis: | Minimal hysteresis promotes detection of low contrast registration marks. |
| Light Immunity: | Responds to sensor's pulsed modulated light soruce resulting in high immunity to most ambient light |
| Ambient Temperature: | -40°C to 70°C (-40°F to158°F) |
| Pulse Stretcher Timer: (Selectable) | Provides minimum of 15 millisecond output duration |
| Push-Button Control: | Automatic setup routines based on web opacityOne push-button setupPushing both buttons simultaneously inverts output |
| Indicators: | Green LED flashes when AUTOSET routine is activated and stays illuinated when AUTOSET is completed.Red LED illuminates when sensor's output transistors are "ON". NOTE: The status of the output transistors can be inverted by pushign both buttons simlutaneously. |
| Rugged Construction: | Chemical resistant high thermoplastic PPS housingWaterproof, NEMA 4 and IP66Conforms to heavy industry grade CE and UL requirements |
