MCC 118 - Voltage Measurement DAQ HAT for Raspberry Pi
MCC 118
MCC 118

MCC 118

Price: $108.90
Available 2 for immediate shipment, more equipment consult Logicbus.
Part number:MCC 118
Quantity pricing
  • 3 - 4
  • $108.90
  • 5 - 9
  • $106.68
  • 10 - 24
  • $103.35
  • 25 - 49
  • $98.90
  • 50 - 99
  • $97.79
  • 100+
  • $95.57
Voltage Measurement DAQ HAT for Raspberry Pi. 8 SE Analog Input, 12-bit, 100KS/s. Range +-10VDC. Power: 3.3 V provided by Raspberry pi. Up to eight MCC 118 devices can be stacked. Raspberry Pi is not included

The MCC 118 is a voltage HAT (Hardware Attached on Top) board designed for use with Raspberry Pi, the most popular single-board computer on the market today.

A HAT is an add-on board with a 40W GPIO (general purpose input/output) connector that conforms to the Raspberry Pi HAT specification.

The MCC 118 HAT provides eight single-ended (SE) analog inputs for voltage measurements. Up to eight MCC HATs can be stacked onto one Raspberry Pi.

Raspberry Pi Interface

The MCC 118 header plugs into the 40-pin general purpose I/O (GPIO) connector on a user-supplied Raspberry Pi. The MCC 118 was tested for use with all Raspberry Pi models with the 40-pin GPIO connector.

HAT configuration

HAT configuration parameters are stored in an on-board EEPROM that allows the Raspberry Pi to automatically set up the GPIO pins when the HAT is connected.

Stackable HATs

Up to eight MCC HAT boards can be stacked onto a single Raspberry Pi. Multiple boards can be synchronized using external clock and trigger input options.

Users can mix and match MCC HAT models in the stack.

Analog Input

The MCC 118 provides eight 12-bit SE analog inputs. The analog input range is fixed at ±10 V.

Sample Rates

  • Single-board: max throughput is 100 kS/s.
  • Stacked boards: max throughput is 320 kS/s aggregate.

External Scan Clock

A bidirectional clock I/O pin lets users pace operations with an external clock signal or with the board’s internal scan clock. Use software to set the direction.

Digital Trigger

The external digital trigger input is software-configurable for rising or falling edge, or high or low level.


The MCC 118 is powered with 3.3 V provided by the Raspberry Pi through the GPIO header connector.

  • Eight 12-bit voltage inputs
  • 100 kS/s max sample rate (320 kS/s aggregate for stacked boards)
  • ±10 V input range
  • Onboard sample buffers allow high-speed acquisition
  • External scan clock I/O
  • External digital trigger input
  • Screw terminal connections
  • Stack up to eight MCC HATs onto a single Raspberry Pi Software
  • MCC DAQ HAT Library; available on GitHub Supported Operating Systems
  • Linux®/Raspbian
  • Programming API: C, C++, Python

Related items

Recently viewed items