Specifications |
Hardware |
CPU |
80186, 80 MHz or compatible |
SRAM/Flash/EEPROM |
512 KB / 512 KB / 2 KB |
RTC (Real Time Clock) |
Yes |
CAN Interface |
Controller |
NXP SJA1000T with 16 MHz clock |
Transceiver |
NXP 82C250 |
Channel number |
1 |
Connector |
5-pin screw terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, N/A) |
Baud Rate (bps) |
10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow ser-defined baud rate) |
Transmission Distance (m) |
Depend on baud rate (for example, max. 1000 m at 50 kbps ) |
Isolation |
3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
Terminator Resistor |
Jumper for 120 O terminator resistor |
Specification |
ISO-11898-2, CAN 2.0A and CAN 2.0B |
LED |
Round LED |
Tx/Rx LED, ERR LED |
Software |
Driver |
For I-8000/ iP-8000/ ViewPAC-2000/ WinPAC-8000/ LinPAC-8000/ XPAC-8000-CE6 |
Library |
TC/BC, GCC, VB.Net 2003, C#.Net 2003, VB.Net 2005, C#.Net 2005,eVC++ 4.0 |
Power |
Power supply |
Unregulated +10 ~ +30 VDC |
Power Consumption |
2 W |
I/O Expansion |
I/O Expansion Bus |
Yes, to mount one optional XW-board |
Mechanism |
Dimensions |
31mm x 91mm x 115mm (W x L x H) |
Environment |
Operating Temp. |
-25 ~ +75 °C |
Storage Temperature |
-30 ~ +80 °C |
Ambient Relative Humidity |
10 ~ 90% RH (non-condensing) |