GENERAL SPECIFICATIONS |
CAN Interface |
Controller |
NXP SJA1000T with 16 MHz clock Microprocessor inside with 20MHz |
Transceiver |
NXP 82C250 |
Channel number |
1 |
Connector |
5-pin screwed terminal block (CAN_L, CAN_SHLD, CAN_H, N/A for others) |
Baud Rate (bps) |
10k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1000 k |
Transmission Distance (m) |
Depend on baud rate (for example, max. 1000 m at 50 kbps ) |
Isolation |
3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
Terminator Resistor |
Switch for 120 O terminator resistor |
Specification |
ISO-11898-2, CAN 2.0A and CAN 2.0B |
Protocol |
CANopen DS-301 ver4.02 |
Hardware |
CPU |
80186, 80 MHz or compatible |
SRAM/Flash/EEPROM |
512 KB / 512 KB / 16 KB |
NVRAM |
31 bytes (battery backup, data valid for up to 10 years) |
RTC (Real Time Clock) |
Yes |
Watchdog |
CPU built-in |
LED |
Round LED |
PWR LED, Rx/Tx LED, ERR LED |
Software |
Driver |
Windows CE5, Windows CE6 |
Library |
For CE5: VB.Net, C#.Net, VC 2005 (with .Net Framework 2.0 or upper), and eVC++ 4.0 For CE6: VB.Net, C#.Net, VC 2008 (with .Net Framework 3.5 or upper) |
Power |
Power Consumption |
2 W |
Mechanism |
Dimensions |
31mm x 115mm x 91mm (W x L x H) |
Environment |
Operating Temp. |
-25 ~ 75°C |
Storage Temp. |
-40 ~ 80°C |
Humidity |
5 ~ 95% RH, non-condensing |