USB to HART Gateway/Converter. Working in point-to-point or multi-drop HART mode. Allow two HART masters and can connect up to 15 HART modules. DIN-Rail or Wall Mounting. Operating Temperature -25 to 75°C. No external power supply (powered by USB)
USB to HART Gateway/Converter. Working in point-to-point or multi-drop HART mode. Allow two HART masters and can connect up to 15 HART modules. DIN-Rail or Wall Mounting. Operating Temperature -25 to 75°C. No external power supply (powered by USB).
The I-7567 is a USB to HART converter designed for the master device of HART protocol. It allows users to access the HART slave by using virtual COM-port. It can be used with HART slave devices like transmitters, actuators, current output devices, etc. It also comes with free utility tool for configuration.s
The I-7567 converter and can be used as a HART master with HC_Tool utility or a HART slave with HDS utility.
I-7567 as HART Master:
It allows users to access the HART slave via virtual COM-port of PC. When connecting I-7567 to PC, PC will load the relevant device driver automatically (hot plug & play). Therefore, users can make data collection and processing of HART network easier and quicker by applying I-7567. In addition, by using the I-7567 utility, users can configure module and test HART communication easily.
I-7567 as HART Slave:
HART Device Simulator (called HDS) is the HART device simulation software developed by ICP DAS. It can be used to simulate multi HART slave devices simultaneously to exchange data with HART master device by using ICP DAS HART converter (like: I-7567/I-7570/I-7547) connected to any COM port (USB/232/485/Ethernet). By this way, users can develop or verify the HART master program without any HART slave device.
HDS (HART Device Simulator)
- Support HART Short/Long frame
- Support HART Burst mode
- Support point-to-point or multi-drop HART mode
- Support connecting up to 15 HART slave devices
- Allow two HART masters
- Provide utility tool for module configuration and HART communication
- No external power supply (powered by USB)
- Support firmware update via USB
- Provide PWR/Tx/Rx indication LED
- 4KV ESD Protection
- Selectable 250O load resistor
- Support HART OPC Server provided by HART COMMUNICATION FOUDATION
- Support FDT (Field Device Tool) technique and the below FDT software have been tested OK
(1) PACTware (PACTware):
(2) FieldCare (Endress+Hauser):
(3) PDM (Seimens):
- Current Measurement
- Petrochemical Industry Application
- Environment Monitoring
- Tunnel Monitoring
- Building Monitoring
- Monitoring systems
FDT (Field Device Tool)
FDT (Field Device Tool) standardizes the communication and configuration interface between all field devices and host systems. FDT provides a common environment for accessing the devices' most sophisticated features. Therefore, by using ICPDAS HART converters, I-7567, I-7570 or I-7547, supporting FDT, users can easily and quickly construct HART online control and configuration system.