Specifications |
CAN Interface |
Controller |
NXP SJA1000T with 16 MHz clock |
Transceiver |
NXP 82C250 |
AMIS 41682 |
1 |
Connector |
2-pin screwed terminal block (CAN_L, CAN_H) |
Baud Rate (bps) |
10 k, 20 k, 50 k, 100 k, 125 k, 250 k, 500 k, 800 k and 1 M (allow user-defined baud rate) |
Protection |
1000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
Terminator Resistor |
Jumper for 120 ? terminator resistor |
Specification |
ISO-11898-2, CAN 2.0A and CAN 2.0B |
UART Interface |
COM 1 |
RS-232 |
COM 1 Connector |
5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND ) |
COM 2 |
RS-485 (Self-turner inside) |
COM 2 Connector |
2-pin screwed terminal block (DATA+, DATA-) |
Baud Rate (bps) |
110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
Data bit |
7, 8 |
Stop bit |
1 |
Parity |
None, Even, Odd |
Ethernet Interface |
Controller |
10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX) |
Connector |
RJ-45 with LED indicator |
Power |
Power supply |
Unregulated +10 ~ +30 VDC |
Power Consumption |
2.5W |
Protection |
Power reverse polarity protection, Over-voltage brown-out protection |
Mechanism |
Installation |
DIN-Rail |
Dimensions |
72mm x 118mm x 33mm (W x L x H) |
Environment |
Operating Temp. |
-25 ~ 75° C |
Storage Temp. |
-30 ~ 80° C |
Humidity |
10 ~ 90% RH, non-condensing |