I-7530

In pair connection mode, I-7530 can be used to connect PC with other RS-232 devices at the same time. I-7530 can also enable programmable RS-232 devices such as PC's, I-8411/I-8431/I-8811/I-8831 embedded controllers to be the master of a CAN network.

3000V isolation on CAN side The CAN port of I-7530 is an isolated with 3000V isolation. This isolation can protect the local RS-232 devices from the damage signal coming from CAN network.

Watchdog inside The watchdog is a hardware reset circuit to monitor the operation status. When working in harsh or noisy environment, the I-7530/I-7530-FT may shut down by the external signal. The circuit may let the I-7530/I-7530-FT to work continuously and never halt.

Power and Error indicator display There are two indicators on the I-7530/I-7530-FT.The power indicator can help user to check whether the I-7530/I-7530-FT is standby or transmitting/receiving messages. The Error indicator will be turned on when some errors occur on the I-7530/I-7530-FT.

FEATURES:
• Compatible with CAN specification 2.0A and 2.0B
• Fully compatible with ISO 11898-2 standard (for I-7530)
• Support various baud rate from 10K bps to 1M bps
• Jumper for 120 O terminator resistor (for I-7530)
• Software configurable CAN and RS-232 communication parameters
• Power, data flow and error indicator for CAN and RS-232
• Watchdog inside
• Support transparent communication mode
• 1000 frames in CAN received buffer and 900 frames in RS-232 received buffer