I-5534-M

The I-5534-M is one kind of CAN bus switch. There are four independent CAN channels which offer a flexible design of the start or tree network topology. This new topology could resolve the complex CAN bus application, like industrial machinery, building automation, vehicle automation, and etc. Furthermore the I-5534-M integrates and exchanges data between different CAN network which has different baud rate. It helps users to extend the CAN network system. The I-5534-M could increase the maximum CAN node count in a CAN network by splitting the CAN network into several subnets. In additional, the user-defined CAN baud rate and CAN filter configuration are also supported.

• 4 CAN communication ports
• Compatible with CAN specification 2.0A and 2.0B
• Fully compatible with the ISO 11898-2 standard
• Baud rate : 5 k, 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 M bps and user-defined
• CAN bus filter is configurable
• 100 data frames buffer for each CAN channel
• Max data flow up to 2500 fps for all CAN channel
• Selectable baud rate by rotary switch
• Selectable 120O terminator resistor by DIP switch
• LED for CAN reception and transmission
• Support CAN network with star or tree topology
• Extending the CAN bus distance to expand the CAN network size
• Integrating different CAN network with different baud rate
• I-2534 is casing with Flame-Resistant plastic case
• I-5534-M is casing with Aluminum metallic case
• Utility tool for CAN filter, route path, user-defined baud rate and CAN-ID mapping (v1.10 firmware) configuration
• Max. CAN-ID mapping data up to 32 for each CAN channel. (v1.10 firmware)