Specifications |
CAN Interface |
Connector |
Screwed terminal block (CAN_GND, CAN_L, CAN_H) |
Baud Rate (bps) |
10 k ~ 1 M |
Transmission Distance (m) |
Depend on baud rate |
Terminator Resistor |
Switch for 120? terminator resistor |
Isolation |
2500 Vrms |
Specification |
ISO-11898-2, CAN 2.0A and CAN 2.0B |
Fiber Interface |
Connector |
ST (Multi-mode) |
Wave Length |
850 nm |
Fiber Cable |
50 / 125 µm , 62.5 / 125 µm, 100 / 140 µm (62.5 / 125µm is recommended) |
Propagation Delay |
125ns max (125ns delay shortens bus line length by ~ 25 m) |
Transmission Distance (m) |
2 km max (in 62.5 / 125 µm fiber cable) |
LED |
Round LED |
PWR LED, CAN_Tx LED, CAN_Rx LED, CAN_Err LED, FB_Err LED |
Power |
Power supply |
Unregulated +10 ~ +30 VDC |
Protection |
Power reverse polarity protection, Over-voltage brown-out protection |
Power Consumption |
3 W |
Mechanism |
Installation |
DIN-Rail |
Dimensions |
32.3mm x 77.5mm x 99.0mm (W x L x H) |
Environment |
Operating Temp. |
-25 ~ 75° C |
Storage Temp. |
-40 ~ 80° C |
Humidity |
5 ~ 90% RH, non-condensing |