Specifications |
Hardware |
CPU |
80186, 80 MHz or compatible |
SRAM/Flash/EEPROM |
512 kB/16 kB |
Watchdog |
Watchdog IC CPU built-in |
ESD Protection |
4 kV class A |
PROFIBUS Interface |
Controller |
Profichip VPC3+C |
Transceiver |
ADI ADM2486 |
Connector |
9-pin female D-Sub |
Baud Rate (bps) |
9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M |
Transmission Distance (m) |
Depend on baud rate (for example, max. 1200 m at 9.6 kbps ) |
Isolation |
3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic |
Protocol |
DP-V0 & DP-V1 |
LED |
Round LED |
PWR LED, RUN LED, ERR LED |
Power |
Power supply |
Unregulated +10 ~ +30 VDC |
Power Consumption |
2.5W |
Protection |
Power reverse polarity protection, Over-voltage brown-out protection |
Ethernet Interface |
Controller |
10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX) |
Connector |
RJ-45 with LED indicator |
UART Interface |
COM |
RS-232 (For updating firmware and configuration) |
COM Connector |
5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND) |
Baud Rate (bps) |
2400, 4800, 9600, 19200, 38400, 57600, 115200 |
Data bit |
7, 8 |
Stop bit |
1, 2 |
Parity |
None, Even, Odd |
Mechanism |
Installation |
DIN-Rail |
Dimensions |
72 mm x 33mm x 119mm (WxLxH) |
Environment |
Operating Temp. |
-25 a 75°C |
Storage Temp. |
-30 a 85°C |
Humidity |
5 ~ 95% RH, non-condensing |