Specifications |
Hardware |
CPU | 80186, 80 MHz or compatible |
Watchdog | Watchdog IC |
CAN Interface |
Controller | NXP SJA1000T with 16 MHz clock |
Transceiver | NXP 82C250 |
Connector | 5-pin screwed terminal block (CAN_L, CAN_H, N/A for others) |
Isolation | 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
Protocol | DeviceNet Volumn I ver2.0, Volumn II ver2.0 |
Ethernet Interface |
Controller | 10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX) |
Connector | RJ-45 with LED indicator |
Protocol | Modbus TCP |
UART Interface |
COM 1 | RS-232 |
COM 1 Connector | 5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND ) |
COM 2 | RS-485 (Self-turner inside) |
COM 2 Connector | 2-pin screwed terminal block (DATA+, DATA-) |
Protocol | Modbus ASCII / Modbus RTU |
Power |
Power supply | Unregulated +10 ~ +30 VDC |
Power Consumption | 2.5W |
Protection | Power reverse polarity protection, Over-voltage brown-out protection |
Environment |
Operating Temperature | -25 to 75 °C |
Storage Temperature | -30 to 80 °C |
Humidit | 10 to 90% RH, non-condensing |
Mechanism |
Dimensions | 72mm x 33mm x 119mm (W x L x H) |