| Specifications |
| Analog Input |
| Input Channels | 6 (Differential) |
| Input Type | ±500 mV, ±1V, ±5 V, ±10 V
+0 mA ~ +20 mA, ±20 mA, 4 ~ 20 mA (Jumper Selectable) |
| Resolution | Normal Mode | 16-bit |
| Fast Mode | 12-bit |
| Sampling Rate | Normal Mode | 10 Samples/Sec. |
| Fast Mode | 60 Samples/Sec. (Total) |
| Accuracy | Normal Mode | ±0.1% |
| Fast Mode | ±0.5% or better |
| Bandwidth | Normal Mode | 15.7 Hz |
| Fast Mode | 78.7 Hz |
| Zero Drift | ±20 uV/°C |
| Span Drift | ±25 ppm/°C |
| Input Impedance | 2 MO |
| Common Mode Rejection | 86 dB Min. |
| Normal Mode Rejection | 100 dB |
| Open Wire for Current Output | 4 ~ 20mA |
| Overvoltage Protection | 240 Vrms |
| ESD Protection | ±4 kV (Contact for each channel)
±8 kV air for random point |
| EFT Protection | ±4 kV for Power |
| Analog Input |
| Output Channels | 2 |
| Span Drift | +0 V~ +5 V, ±5 V, +0 V~ +10 V,
±10 V,+0 mA ~ +20 mA, +4 mA ~ +20 mA
(jumper selectable) |
| Resolution | 12-bit |
| Accuracy | ±0.1% of FSR |
| Voltage Output Capability | 100 dB |
| Current Load Resistance | 500 Ohms |
| Power-Up and SafeValue | Yes |
| Open Wire for Current Output | 4 ~ 20mA |
| Digital Output |
| Output Channels | 2 (Sink) |
| Output Type | Isolated Open Collector |
| Max Load Current | 700 mA/Channel |
| Load Voltage | +5 VDC ~ +50 VDC |
| External Power Reversed Protection and Short Circuit Protection | Yes |
| Over-Temperature Protection | Yes, 150^C |
| Current limited Protection | 1.1 A |
| Digital Input |
| Input Type | 2 (Dry+Wet) |
| Dry Contact(Source) | On Voltage Level | Close to GND |
| Off Voltage Level | Open |
| Effective Distance for Dry Contact | 500M Max. |
| Wet contact | On Voltage Level | +1 VDC Max. |
| Off Voltage Level | +3.5 VDC ~ +30 VDC |
| Counters | Channels | 2 |
| Max. Counts | 16-bit (65535) |
| Max. Input Frequency | 100 Hz |
| Min. Pulse Width | 5 ms |
| System |
| CPU | 80186 CPU (80 MHz) |
| SRAM | 512 KB |
| Flash Memory | 512 KB |
| EEPROM | 16 KB |
| Dual Watchdog | Yes |
| Communication |
| Ethernet Port | 10 / 100 Base-TX (With Link, Activity LED Indicator)
Automatic MDI/MDI-X |
| 2-way Isolation |
| Ethernet | 1500 VDC |
| AI, AO,DI and DO | 2500 Vrms |
| LED Display |
| L1 LED | as run indicator |
| L2 LED | as Link/Act indicator |
| L3 LED | as 10/100M indicator |
| Power Requirements |
| Protection | Power reverse polarity protection |
| Required Supply Voltage | +10 VDC ~ +30 VDC (non-regulated) |
| Power Consumption | 0.10 A @ 24 VDC Max. |
| Mechanical |
| Dimensions (W x H x D) | 72 mm x 123 mm x 35 mm |
| Installation | DIN-Rail or Wall mounting |
| Environment |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Relative Humidity | 5 ~ 90% RH, non-condensing |
