| Technical Specifications |
| Name/Function | Simultaneous Sample and Hold and Low-Pass Filter Card |
| Number of Channels | 4 |
| Input Connections | 4 BNC connectors; 4 screw-terminal sets |
| Output Connector | DB37 male, mates with P1 using CA-37-x cable |
| Number of Cards Addressable | 64 |
| Dimensions | 8.25” × 3.25” |
| Input Type | Differential |
| Voltage Input Ranges |
0 to ±5000 mVDC
0 to ±500 mVDC
0 to ±50 mVDC
0 to ±25 mVDC
0 to ±10 mVDC |
| For Custom Gains | RGAIN = [40,000/(Gain-1)] - 80 ? |
| Input Amplifier Slew Rate | 12 V/µs minimum |
| Acquisition Time | 0.6 µs (10 V excursion to 0.1%)
0.7 µs (10 V excursion to 0.01%) |
| Channel-to-Channel Aperture Uncertainty | 50 ns |
| Output Droop Rate | 0.1 µV/µs |
| Input Gains | ×1, ×10, ×100, ×200, x500, and user-set up to ×500 |
| Input Offset Voltage | 500 µV + 5000/G maximum (nullable) |
| Input Offset Drift | ±5 + 100/G µV/°C maximum |
| Input Bias Current | 100 pA maximum |
| Input Offset Currents | 50 pA maximum |
| Input Impedance | 5 × 1012 ? parallel with 6 pF |
| Switchable Bias Resistors | 100 K? each to analog common |
| Gain Errors |
0.04% @ ×1
0.1% @ ×10
0.2% @ ×100
0.4% @ ×200
1.0% @ ×500 |
| Temperature vs Gain |
±20 ppm/°C @ ×1
±20 ppm/°C @ ×10
±40 ppm/°C @ ×100
±60 ppm/°C @ ×200
±100 ppm/°C @ ×500 |
| Non-Linearity |
±0.015 % full-scale @ ×1
±0.015 % full-scale @ ×10
±0.025 % full-scale @ ×100
±0.025 % full-scale @ ×200
±0.045% full-scale @ ×500 |
| Common-Mode Rejection |
70 dB minimum @ ×1
87 dB minimum @ ×10
100 dB minimum @ ×100
100 dB minimum @ ×200
100 dB minimum @ ×500 |
| Active Filter Device | UAF42 (Burr-Brown) |
| Number of Poles/Filter | 3 |
| Types of Filters | Bessel, Butterworth, Chebyshev |
| Frequency Range | 0.1 Hz to 50 kHz\ The frequency is set by installation of 4-6 resistors and/or capacitors in provided socket locations. |
| Frequency Modules | Optional frequency module kits are available that consist of 4 plug-in resistor/capacitor (RC) headers. These RC headers are preconfigured for any of the following |
| frequencies | 5 Hz, 10 Hz, 100 Hz, 500 Hz, or 1 kHz—all are Butterworthtype filters |
